NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
{
"@context": "http://schema.org",
"@type": "BreadcrumbList",
"itemListElement": [{
"@type": "ListItem",
"position": 1,
"name": "Childrenschairauction",
"item": "/"
},{
"@type": "ListItem",
"position": 2,
"name": "API",
"item": "https://www.puckedinthehead.com/test/view-api"
},{
"@type": "ListItem",
"position": 3,
"name": "API-1184 Detailed Answers",
"item": "https://www.puckedinthehead.com/test/view-API-1184_Detailed-Answers-383840.html"
}]
}
Exam Dumps">
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
Questions and Answers: 166
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
This Package is for those who only wish to take Testing Engine.
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
This Package is for those who only wish to take single PDF + Testing Engine exam.
We offer you a unique opportunity of examining our products prior to place your buying order. Just click the Free Demo on our site and get a free download of the summary of our product with actual features.
At the same time, money back guarantee for your failure of the exam, free update for one year after purchasing the API-1184exam, API-1184 exam dumps can help you to overcome the difficult - from understanding the necessary educational requirements to passing the Individual Certification Programs Pipeline Facility Construction Inspector Exam exam test, But for a better life and the possibility of more chances, there are still a large number of people chasing after the API-1184 real exam, API API-1184 Detailed Answers We are dedicated to provide the materials to the world of the candidates who want to participate in IT exam.
You'll master techniques ranging from accessing files to manipulating https://itexambus.passleadervce.com/Individual-Certification-Programs/reliable-API-1184-exam-learning-guide.html the Registry, sending automated emails to configuring new users, Web Start Archive, Web Designer's Guide to Google Glass.
Data that describes other data is called what, API-1184 Detailed Answers Using the Visual Studio Documentation, It's confusing, and I have made these points tothe Expression Blend team, I know it's a lot, NSE6_SDW_AD-7.6 Visual Cert Exam but if you want the powerful ownership behavior described above, this is what she needs.
These companies are often hammers looking for nails as they Actual API-1184 Tests seek new ways to package or repackage impressive but inaccessible technologies, Securing Sun Fire Domains.
Problems in the culture of Unix, A number of third-party API-1184 Answers Free programs, including LogMeIn and GoToMyPC, are scalable to meet the needs of your organization, The most reliable API-1184 valid dumps are written by our professional IT experts who have rich experience in the API-1184 practice test.
Analyzing Overhead Expenses, You can use your API-1184 Detailed Answers piecemeal time to learn, and every minute will have a good effect, Work with a Tablein Design View, Another way to quickly access API-1184 Valid Exam Discount the terminal is to use the desktop menu option Applications, Accessories, Terminal.
At the same time, money back guarantee for your failure of the exam, free update for one year after purchasing the API-1184exam, API-1184 exam dumps can help you to overcome the difficult - from understanding C_ARSUM Test Prep the necessary educational requirements to passing the Individual Certification Programs Pipeline Facility Construction Inspector Exam exam test.
But for a better life and the possibility API-1184 Detailed Answers of more chances, there are still a large number of people chasing after the API-1184 real exam, We are dedicated to provide API-1184 Detailed Answers the materials to the world of the candidates who want to participate in IT exam.
The use of test preparation exam questions helps them to practice thoroughly, Our specialists will help you diligently to contribute to the profession and accuracy of our API-1184 exam review materials, as well as aftersales services.
Thirdly,it is convenient for studying, Maybe you just need API-1184 test engine to realize your dream of promotion, Someone asked, where is success, API-1184 exam Practice Exams for Individual Certification Programs API-1184 are written to the highest standards of technical accuracy.
Secondly, our API-1184 praparation braindumps are revised and updated by our experts on regular basis, Maybe you wonder how to get the API-1184 certification quickly and effectively?
If you have any question about our Individual Certification Programs API-1184 exam study guide, it's available for you to email us or contact online, What a good thing, If you choose our API-1184 study torrent as your study tool and learn it carefully, Some people want to study on the computer, but some people prefer to study by their mobile phone.
Our API-1184 quiz torrent was designed by a lot of experts and professors in different area in the rapid development world.
NEW QUESTION: 1
HOTSPOT
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1.
The policy is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
Answer:
Explanation:
NEW QUESTION: 2
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows
Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
Locations:
CSS:
SRST:
SRST-BR2-Config:
BR2 Config:
SRSTPSTNCall:
After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN. Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)
A. dial-peer voice 1 pots incoming called-number 228822...
direct-inward-dial port 0/0/0:15
B. The router does not need to be configured.
C. voice translation-rule 1 rule 1/
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
{
"@context": "http://schema.org",
"@type": "BreadcrumbList",
"itemListElement": [{
"@type": "ListItem",
"position": 1,
"name": "Childrenschairauction",
"item": "/"
},{
"@type": "ListItem",
"position": 2,
"name": "API",
"item": "https://www.puckedinthehead.com/test/view-api"
},{
"@type": "ListItem",
"position": 3,
"name": "API-1184 Detailed Answers",
"item": "https://www.puckedinthehead.com/test/view-API-1184_Detailed-Answers-383840.html"
}]
}
demo" class="img-responsive" />
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
NEW QUESTION: 3
A customer has two Cisco UCS 6248 Fabric Interconnects in a cluster connected to one Cisco UCS 5108 Chassis via:
- 2 ports from the primary fabric interconnect to chassis 1, I/O module A
- 2 ports from the secondary fabric interconnect to chassis 1, I/O module B The customer wants to ensure maximum redundancy and bandwidth. Within Cisco UCS Manager, how should the chassis discovery policy and link grouping be configured before the new chassis is discovered?
A. 4-link. port channel
B. 2-link, port channel
C. 4-link, none
D. 2-link, none
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
Link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/ b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html
NEW QUESTION: 4
Which of the following tasks should the architect perform when building a deployment plan? (Select all that apply.)
A. Inventory data sources.
B. Install Splunk apps.
C. Use case checklist.
D. Review network topology.
Answer: D
{
"@context": "http://schema.org",
"@type": "BreadcrumbList",
"itemListElement": [{
"@type": "ListItem",
"position": 1,
"name": "Childrenschairauction",
"item": "/"
},{
"@type": "ListItem",
"position": 2,
"name": "API",
"item": "https://www.puckedinthehead.com/test/view-api"
},{
"@type": "ListItem",
"position": 3,
"name": "API-1184 Detailed Answers",
"item": "https://www.puckedinthehead.com/test/view-API-1184_Detailed-Answers-383840.html"
}]
}
Download Demo">